| 单相接地变 |
| 添加时间：2021/8/3 15:47:09 浏览次数： |
单相接地变
单相接地变：单相接地变主要用于有中性点的发电机、变压器的中性点接地电阻柜，以降低电阻柜的造价和体积。Single phase grounding transformer: single-phase grounding is mainly used for neutral point grounding resistance cabinet with neutral point generator and transformer, so as to reduce the cost and volume of the resistance cabinet. 1）单相接地电弧发生间歇性的熄灭与重燃，会产生弧光接地过电压，其幅值可达4U（U为正常相电压峰值）或者更高，持续时间长，会对电气设备的绝缘造成极大的危害，在绝缘薄弱处形成击穿；造成重大损失。 1) single-phase grounding arc extinction and reignition intermittent, will produce arc grounding overvoltage, the amplitude of up to 4U (U is the normal phase voltage peak) or higher, lasted for a long time, the insulation of electrical equipment will cause great harm, the formation of weakness in the insulation breakdown; causing heavy losses. 2）由于持续电弧造成空气的离解，破坏了周围空气的绝缘，容易发生相间短路。 2) because of the dissociation of the air caused by the continuous arc, the insulation of the surrounding air is destroyed, and the interphase short circuit is easy to occur. 3）产生铁磁谐振过电压，容易烧坏电压互液压钢坝 感器并引起避雷器的损坏甚至可能使避雷器爆炸。这些后果将严重威胁电网设备的绝缘，危及电网的安全运行。 3) a ferromagnetic resonance overvoltage can easily burn out the voltage transformer and cause the damage of the arrester or even the lightning arrester can explode. These consequences will seriously threaten the insulation of the power grid equipment and endanger the safe operation of the power grid |
| 上一页 常用的中性点接地方式有:中性点直接接地、中性点不接地、中性点经消弧线圈接地、中性点经电阻接地这四种方式 |
| 下一页 传统的中性点接地电阻柜只是一种纯硬件保护装置。 |