对于电阻柜产品有所应用的用户可能有所了解,为了对其使用能够顺利的进行,在我们对其使用前需要进行一定的检查工作,首先就是直观的从外观来看,电阻柜不能有任何顺坏损坏(重要部件)、引线不能生锈,端帽不能松动。这时候当我们对其检查工作完成后,需要用万能表检查其阻值是否和标称阻值一样相符,在测量前,要选择好合适的电阻档,并进行电阻器档调零。测量时,一只手拿万用表的两表笔,另 一只手捏住电阻柜的中间,用两表笔接触电阻器的两引出端,可方便测出其阻值。为了更好的促进用户对其了解,相关人员还补充到,对于外形较小的电阻柜,可将其放在桌子上,用表笔直接测量。复测后,与标志不符的电阻器,一般不要选用。因此电阻柜在使用前一定要做好使用前的检查工作,能够确保质量的情况下再进行使用,这样才能做到安全放心。

For resistance ark product applications, users may, in order to use its can go smoothly, the need to be certain before we use to its inspection work, the first is intuitive from the outside, there cannot be any suitable bad damage resistance ark (important part), not rust, lead end cap can't loose. At that time when we after completion of the inspection work, need to use the multimeter to check whether the resistance as consistent as nominal value, before the measurement, to choose suitable resistance, and resistor to zero. Measurement, two pens and a hand multimeter, another hand hold the middle of resistance ark, use two pens and two terminal contact resistor, easy to measure its value. In order to better promote users to understand it, added to the related personnel, for the ark of the resistance of smaller shape, can be on the table, with pens and direct measurement. After the retest, the resistor, which is not in accordance with the logo, is not normally chosen. Therefore, the resistance cabinet must be done before using the inspection, which can ensure the quality of the use, so that the safety can be assured.